A Fast, Efficient and Friendly Plumbing services you can depend on..

46 Housesteads Dr, Chester CH2 3DL, England

Power Flushing

POWER FLUSHING FOR CENTRAL HEATING SYSTEMS

Fernox Power flushing

  • Power flush central heating system to remove corrosion debris, sludge and scale
  • Descale boilers
  • Overcome boiler noise and circulation problems
  • Clean a system with just ONE visit to site
  • Fully acid resistant
  • High temperature operation to enable faster cleaning

Fernox Power flushing is the fastest and most efficient way of cleaning your central heating system. A power flushing unit is connected to the heating circuit in place of the central heating pump or to a radiator and then a powerful fresh water flow together with Fernox power flushing chemicals will thoroughly cleanse the heating system, removing all the sludge & limescale from the radiators, boiler and pipe work. The flushing procedure usually takes 5-6 hours depending on the size of the building and depending on how many many radiators there are. Chester Plumber can flush all types of heating systems including gas, LPG oil and electric. If we carried out one of your Chester boiler installations, or any other previous installations we can offer a discount on our flushing services on request.

After the all the debris have been removed Fernox Central Heating Protector is added to the system to protect the heating system from long term corrosion damage.

The Fernox Power flushing process usually takes between 3 & 6 hours. Magnetic filters can be added to the system to help keep the system clean after the power flush

How do I know if my heating system needs Power Flushing?

  • Radiators cold in the middle or at the bottom.
  • Radiators that are cold all over due to blocked pipes
  • Dirty water present when bleeding radiators
  • Lack of hot water due to blocked pipes
  • Reduced flow to the heat exchanger
  • Boiler and pump noise
  • Reduced efficiency

After Fernox Power Flushing you can expect

  • Increased efficiency
  • Up to 25% saving on fuel bills
  • Faster warm up time
  • Quieter system running
  • Better circulation
  • Protection against corrosion and limescale
  • Warmer radiators

Your central heating systems need proper maintenance to keep them functioning smoothly. The most widely preferred and effective way to maintain your central heating system is power flushing.

Much like what the name suggests the power flushing procedure includes cleaning your central heating system by circulating forced water in large amounts through the system.The process doesn’t just include water when undertaking a power flush. Cleaning agents are used with water to give you a spick and span central heating system.

Common signs for a power flush

One of the most common signs that show you need a power flushing procedure for your central heating system is cold spots.If your system has certain cold spots or is cold at the bottom it indicates that you need power flushing.

If one or more of your radiators aren’t working or the system is slow to warm up, then this would also be an indication to call a Chester heating engineer, as you are likely to need a flushing procedure for your central heating system to function well.

The typical power flush procedure:

  • Hire a power flush
  • Isolate your power supply to the system
  • Keep the Earth continuity bond intact
  • Close isolating pipes on either side of your heating pump
  • Remove the pump from the system
  • Connect your power flush
  • Ensure your dumping hose goes to the right drain
  • Add your cleaning fluid to the power flush
  • Switch on the power flush
  • Turn on the boiler and turn it off when the water temperature reaches 45 degrees.
  • Repeat every 10 minutes
  • You can also use a corrosion inhibitor
  • Once you are done, disconnect everything one by one and connect the main system as it was before.

If all this sound foreign to you, or even if you think you can pull it off, we suggest you give a call to the experts at Chester Plumbing. Our expert workers have the right skills, experience, tools, and know-how. Going DIY can be risky, costly,and harmful for you and your system.

Let our experts carry out the flushing procedure for your central heating while you sit back and relax.

Make an Enquiry


    • How Did You Hear of Us ?